1" Standard Tooth Tong Die
1" GRITFACE® Tong Die
Use with corrosion-resistant alloy (CRA) tubulars.
1" Diamond Tooth Tong Die
| Standard Tooth Number | GRITFACE® Number | Diamond Tooth Number | Dimensions | Reference Number | Weight |
|---|---|---|---|---|---|
| 12-0006-107-0 | G2-0006-107-5 | 12-0006-107-D | 3/8" x 1" x 1-7/16" | 1507 | 0.170 |
| 12-0006-114-0 | G2-0006-114-5 | 12-0006-114-D | 3/8" x 1" x 1-7/8" | 1506 | 0.180 |
| 12-0006-115-0 | G2-0006-115-55 | 12-0006-115-D | 3/8" x 1" x 1-15/16" | 1501 | 0.190 |
| 12-0006-202-0 | G2-0006-202-5 | 12-0006-202-D | 3/8" x 1" x 2-1/8" | 1502 | 0.200 |
| 12-0006-208-0 | G2-0006-208-5 | 12-0006-208-D | 3/8" x 1" x 2-1/2" | 1503 | 0.210 |
| 12-0006-210-0 | G2-0006-210-5 | 12-0006-210-D | 3/8" x 1" x 2-5/8" | 1504 | 0.220 |
| 12-0006-314-0 | G2-0006-314-5 | 12-0006-314-D | 3/8" x 1" x 3-7/8" | 1505 | 0.320 |
| 12-0006-404-0 | G2-0006-404-5 | 12-0006-404-D | 3/8" x 1" x 4-1/4" | 1508 | 0.350 |
| 12-0006-408-0 | G2-0006-408-5 | 12-0006-408-D | 3/8" x 1" x 4-1/2" | 1509 | 0.370 |
| 12-0006-512-0 | G2-0006-512-5 | 12-0006-512-D | 3/8" x 1" x 5-3/4" | 1510 | 0.470 |
| 12-0007-314-0 | G2-0007-314-5 | 12-0007-314-D | 7/16" x 1" x 3-7/8" | 1511 | 0.380 |
| 12-0008-314-0 | G2-0008-314-5 | 12-0008-314-D | 1/2" x 1" x 3-7/8" | 1521 | 0.440 |
| 12-0008-500-0 | G2-0008-500-5 | 12-0008-500-D | 1/2" x 1" x 5" | 1522 | 0.560 |
| 12-0009-208-0 | G2-0009-208-5 | 12-0009-208-D | 9/16" x 1" x 2-1/2" | 1531 | 0.320 |
| 12-0010-314-0 | G2-0010-314-5 | 12-0010-314-D | 5/8" x 1" x 3-7/8" | 1541 | 0.550 |
| 12-0011-314-0 | G2-0011-314-5 | 12-0011-314-D | 11/16" x 1" x 3-7/8" | 1542 | 0.610 |
| 12-0016-314-0 | G2-0016-314-5 | 12-0016-314-D | 1" x 1" x 3-7/8" | 1546 | 0.900 |
- “MPS” Safety Clamps
- “MP” Safety Clamps
- “C” Safety Clamps
- “T” Safety Clamps
- Inserts for Oil Country Handling Tools
- Inserts for Cavins Handling Tools
- Inserts for ST-80 Iron Roughneck Tools
- Inserts for Guiberson F-1/H-1 Bowl and Slip
- Inserts for 3-1/2" TS-100 Spider
- Inserts for Bilco Precision Slips and Elevators
- Inserts for Bilco Dual Tools
- Inserts for Hydra Rig 150 Bowl and Slip
- Inserts for Kelco K-70-Style Tool
- Inserts for Kelco K-50-Style Tool
- Inserts for Hydra Rig 300 Bowl and Slip
- Inserts for Hydra Rig 225 Bowl and Slip
- Inserts for Kelco K-30-Style Tool
- Inserts for Kelco K-25-Style Tool
- Inserts for Kelco K-20-Style Tool
- Inserts for Baash-Ross DU Handling Tools
- Inserts for BJ® YC, HYC, Casing Elevators, etc.
- Inserts for BJ® YT, MYT, HYT
- Circular Buttons for Varco® Handling Tools
- Inserts for Varco®-Style Handling Tools
- 5/8" Width Tong Dies
- 1-1/4" Width Tong Dies