Offered in four tooth patterns:  Standard (-0), Pyramid (-P),
Fine Pyramid (-FP) and GRITFACE® (G1-XXXX-XXX-5)

We cannot manufacture thicker than 3/4", or thinner than 5/16"

Standard Tooth NumberGRITFACE® NumberFine Tooth Pyramid NumberDimensionsOEM Reference NumberWeight
11-0005-314-0G1-0005-314-511-0005-314-FP5/8" x 5/16" x 3-7/8"40520.160
11-0005-408-0G1-0005-408-511-0005-408-FP5/8" x 5/16" x 4-1/2"40020.180
11-0006-115-0G1-0006-115-511-0006-115-FP5/8" x 3/8" x 1-15/16"40090.100
11-0006-308-0G1-0006-308-511-0006-308-FP5/8" x 3/8" x 3-1/2"40300.170
11-0006-314-0G1-0006-314-511-0006-314-FP5/8" x 3/8" x 3-7/8"40510.380
11-0006-408-0G1-0006-408-511-0006-408-FP5/8" x 3/8" x 4-1/2"40010.440
11-0010-308-0G1-0010-308-511-0010-308-FP5/8" x 5/8" x 3-1/2"40320.300
11-0010-314-0G1-0010-314-511-0010-314-FP5/8" x 5/8" x 3-7/8"40540.330
11-0010-408-0G1-0010-408-511-0010-408-FP5/8" x 5/8" x 4-1/2"40040.380
11-0011-314-0G1-0011-314-511-0011-314-FP5/8" x 11/16" x 3-7/8"40550.360
11-0011-408-0G1-0011-408-511-0011-408-FP5/8" x 11/16" x 4-1/2"40050.420
11-0531-308-0G1-0531-308-511-0531-308-FP5/8" x 17/32" x 3-1/2"40310.250
11-0531-314-0G1-0531-314-511-0531-314-FP5/8" x 17/32" x 3-7/8"40530.280
11-0531-408-0G1-0531-408-511-0531-408-FP5/8" x 17/32" x 4-1/2"40030.320

Note: We can only manufacture GRITFACE® dies to be contoured, not steel dies.