40- to 60-Ton Scissor Neck Lowboy

Description	Specification
Length	Approximately 53'
Width	8' 6" to 11' plus pin pockets
Working deck	Approximately 25'
Main flanges	High-tensile steel
Main web	High-tensile steel
Cross-members	Steel I-beam on 20" centres
Suspension	TA-300-U9 air ride with rebound chains
Axles	D22 89" track width
Hubs and drums	10-stud unimount cast hubs with cast drums
Brake pots	Spring
Slacks	Automatic 10-spline
Brake linings	16-1/2" x 7"
Wheels	10-hole unimount, 22.5 x 8.25, steel
Tires	275/70R22.5 radial tires
Scissor neck	Full-width pick-up throat, scissor assembly to pin in two or three positions
Jeep extension	Narrow Jeep extension comes with rollers
Kingpin	2" removable on 18" setting
Coupler height	54" or as required
Centre roll	7" ratchet or non-ratchet
Dolly legs	Fold-down
Rear roll	8-5/8" flip-over live roll / beavertail or butt back
Booster attachment	S/A pin-style booster hookup comes with removable lugs to fit Scona booster
Pin pockets	Seven standard per side, mounted outside of flange, plus one each side in flange 4' from neck
Tie-downs	At each cross-member where possible and under each outrigger
Floor	3" rough fir decking including gooseneck
Suspension area	Covered in 2" rough fir
Wheel area	Wheel area open
Air system	Regulation MVSS system with scale gauge and dump valve
Electrical	Regulation with LED lights throughout except mid-marker, swing-out wide-load lights, and four-prong long-load light receptacle on rear
Paint	Sandblasted, primed and painted with Endura plastic paint

McCoy - Moving Global Energy Forward