65-Ton, 24-Wheel Scissor Neck Live Roll

Home » Mobile Solutions » Trailers » Oilfield » Scissornecks/Folding Necks » 65-Ton, 24-Wheel Scissor Neck Live Roll
Scona Logo

65-Ton, 24-Wheel Scissor Neck Live Roll Specifications

Description Specification
Capacity 65 tons distributed over 15'
Length 60'
Deck length 33'
Width 10' 6" wide with 11' outside tires
Laden deck height 46"
Cross-members I-beam cross-members located on 24" centres
Suspension 90,000 lb. fabricated air ride suspension complete with dump valve, suspension pressure gauges and suspension override controls mounted in sealed box
Axle F22, Ingersol axles, weld-on spiders, 16-1/2" x 7" "Q" brakes, rated 22,500 lb. with type 20 brake chambers and oil seals, Haldex automatic slack adjusters
Hubs and drums 10-stud cast unimount
Wheels 10-hole unimount, 22.5 x 8.25, steel
Tires 275/70R22.5 Michelin XTY, 16-ply
Gooseneck Mechanically folding, full-width gooseneck, complete with full-width pick-up throat; tapered front nose for ease of loading; 54" kingpin heights
Gooseneck extension Wide gooseneck extension for use with 16-wheel Jeep; rollers set for 68" rail centres
Kingpin Removable 2" SAE heat-treated
Live roll 10" live roll set 1" above decking with two sets of support rollers
Dummy beams 24" wide, set flush with decking, no grouser bars
Booster provisions Provision for tandem-axle booster complete with air and electrical connections to rear
Tie-downs Tie-down brackets on 24" spacing on main deck, gooseneck and under dummy beams
Tow eyes Mounted in four corners of main deck
Pin pockets 1-5/8" ID heavy-duty pin pockets mounted in standard locations
Decking 2-1/2" dressed fir on deck, gooseneck and over suspension area; 1/4" above main rails
Air system CMVSS-approved
Electrical CMVSS-approved with Truck-Lite LED sealed beam tail and clearance lights; Truck-Lite LED strobe lamps mounted in rear light box assembly; swing-out lights on gooseneck and rear of main deck complete with flag pockets
Paint Sandblasted, primed and painted with Endura plastic paint

Additional Information

Gooseneck – Three-position design for bed truck

Midship roll – 8" Air Lift kicker rolls (2) mounted at rear of main deck (ratchet)

Hubs and drums – 10-stud aluminum hubs complete with centrifuge brake drums

Oilfield

Scissornecks/Folding Necks