| Capacity |
65 tons distributed over 15' |
| Length |
60' overall length (33' working deck) |
| Width |
10' 6" deck width, 11' wide at tires |
| Height |
46" deck height (laden) |
| Weight |
Approximately 34,500 lb. (15,560 kg) +/- 3% |
| Design |
Perimeter frame design of T-1 fabricated rails |
| Cross-members |
I-beam cross-members located on 24" centres |
| Suspension |
Peerless, 90,000 lb. fabricated air ride suspension complete with dump valve, suspension pressure gauges and suspension override controls in sealed box |
| Axles (6) |
F22, Ingersol axles, weld-on spiders, 16-1/2" x 7" "Q" brakes rated 22,500 lb., with type 20 brake chambers and oil seals, Haldex automatic slack adjusters |
| Decking |
2-1/2" dressed fir on deck, gooseneck and over suspension area; 1/4" above main rails |
| Gooseneck |
Mechanically folding, full-width gooseneck, complete with full-width pick-up throat; tapered front nose for ease of loading |
| Kingpin |
Removable 2" SAE heat-treated |
| Live roll |
10" live roll set 1" above decking with two sets of support rollers |
| Dummy beams |
24" wide, set flush with decking, no grouser bars |
| Booster provision |
Provision for tandem-axle booster complete with air and electrical connections at rear |
| Tie-downs |
Tie-down brackets on 24" spacing on main deck, gooseneck and under dummy beams |
| Tow eyes (4) |
Mounted in four corners of main deck |
| Pin pockets |
1-5/8" ID heavy-duty pin pockets mounted in standard locations |
| Grease manifold |
Remote grease lines mounted on suspension pedestals |
| Strobe lamps |
Truck-Lite LED strobe lamps mounted in rear light box assembly |
| Swing-out lights |
On gooseneck and rear on main deck complete with flag pockets |
| Landing legs |
Swing-down landing legs for use with unladen trailer only |
| Sign pockets |
Wide-load sign pockets at rear |
| Mud flaps |
24" black rubber mud flaps at rear of trailer and ahead of midship rolls and control boxes; full-width rubber belting ahead of suspension area |
| Air system |
CMVSS-approved |
| Electrical |
CMVSS-approved with Truck-Lite LED sealed beam tail and clearance lights |
| Paint |
Cleaned, sandblasted, primed, and painted one colour |
