| Length |
Approximately 53' |
| Width |
8' 6" to 10' |
| Working deck |
Approximately 25' with 6", 9", 12", or 14" double drop |
| Main flanges |
High-tensile steel |
| Main web |
High-tensile steel |
| Cross-members |
Steel I-beam on 20" centres |
| Suspension |
TA-300-U9 air ride with rebound chains |
| Axles |
D22 with track width appropriate for trailer width |
| ABS |
2S1M ABS |
| Hubs and drums |
10-stud unimount steel or aluminum hubs with cast or steel drums |
| Brake pots |
Spring |
| Slacks |
Automatic |
| Cams |
10-spline S-cams |
| Brake linings |
16-1/2" x 7" |
| Wheels |
10-hole unimount, 22.5 x 8.25, steel or aluminum |
| Tires |
275/70R22.5 Michelin XTY-2 |
| Neck |
Narrow mechanical removable neck with pick-up throat |
| Fenders |
Steel or aluminum fenders on neck, comes with rear section removable |
| Kingpin |
2" removable on 18" setting |
| Coupler height |
54" |
| Back end |
Butt back end |
| Tie-downs |
At each cross-member where possible and under each outrigger |
| Floor |
3" rough fir decking on outside, 2" in centre |
| Suspension area |
Open or covered |
| Wheel area |
Open or covered |
| Air system |
Regulation CMVSS system with scale gauge and dump valve |
| Electrical |
Regulation LED rubber-mounted lights throughout, swing-out wide-load lights, and four-prong long-load receptacle on rear |
| Paint |
Sandblasted, primed and painted with Endura plastic paint |
