Tri-Axle Air Ride 40-Ton Live Roll Scissor Neck

Description	Specification
Length	Approximately 52' 8"
Width	10'
Working deck	Approximately 24-1/2' of working deck
Main flanges	High-tensile steel
Main web	High-tensile steel
Cross-members	Steel I-beam on 20" centres
Suspension	TA-300-U9 air ride with rebound chains
Axles	D22 89" track
ABS	2S1M ABS system
Hubs and drums	10-stud unimount cast hubs with cast iron drums
Brake pots	Spring
Slacks	Automatic
Cams	10-spline S-cams
Brake linings	16-1/2" x 7"
Wheels	10-hole unimount, 22.5 x 8.25
Tires	275/70R22.5 Michelin XTY-2
Scissor neck	Full width knife edged, to pin in lowboy or highboy position, reinforced checker plate over assembly
Kingpin	2" removable on 18" setting
Coupler height	52" or as required
Centre roll	7" non-ratchet
Dolly legs	Fold-down
Rear roll	8-5/8" flip-over beavertail
Pin pockets	Seven standard per side, mounted outside flange
Tie-downs	At every cross-member location where possible and underside of each outrigger
Floor	3" rough fir decking including gooseneck
Suspension area	Covered in 2" decking
Air system	Regulation MVSS system with scale gauge and dump valve, air chuck in control box
Electrical	Regulation LED rubber-mounted lights throughout, swing-out wide-load lights, and four-prong long-load light receptacle on rear
Paint	Sandblasted, primed, and painted with Endura plastic paint
Tape	Conspicuity tape

McCoy - Moving Global Energy Forward