smartFMS™ Flush Mounted Spider
500 Ton
McCoy’s FMS 500 Ton is unique to the industry, engineered to handle both casing and drill pipe with precision. Featuring interchangeable die carriers and delivering up to 100,000 ft.lbs. of back-up torque from the first joint, it eliminates the need for manual backup tongs—setting a new benchmark in safety, efficiency, and versatility.
- Can be used with both casing & drill pipe
- Fits inside of rotary with a relatively low profile
- Holds weight of casing or drill pipe string
- Reacts backup torque
- Removes crew from the possible pinch points
Performance Specifications
- Maximum Tension Rating – 500 tons
- Fits inside 37 1/2" Rotary Table
- Total Cylinder Cycle Time is 6 Seconds
- Tool Grip Range – Casing Sizes 4” – 20”
Patent US14/226541
Patent CA2943038
Patent MYPI2016703458
| FLUSH MOUNT SPIDER SPECIFICATIONS | ||
|---|---|---|
| MAXIMUM TENSION RATING | 500 TONS | 454 TONNES |
| MAXIMUM WORKING PRESSURE | 3000 PSI | 207 BAR |
| FLOW RATE REQUIRED | 30 GPM | 114 LPM |
| MASS (TOOL ONLY) | 4033 LBS | 1829 KG |
| MASS RANGE (CARRIERS AND GUIDE PLATES INCLUDED) | 4285 - 5960 LBS | 1944 - 2703 KG |
| TIME TO EXTEND AND RETRACT | 6 SECONDS | |
| COMPATIBLE ROTARY TABLE | 37 1/2” / EMSCO 3750 | |
| CASING SIZE RANGE | 4.000” | 20.000” |
| *MAXIMUM TORQUE AT 3000 PSI WORKING PRESSURE ON A SINGLE JOINT | |
|---|---|
| PIPE SIZE (IN) | TORQUE (FT-LB) |
| 9.625 - 20.000 | 100,000 |
| 5.500 - 9.625 | 60,000 |
| 4.500 - 5.000 | 45,000 |
| 4.000 | 40,000 |
* Torque values are determined by slip upon the pipe and not the limitations of the tool
Interchangeable Parts
Insert Carriers
- Multiple sizes of insert carriers to cover the full range of gripping
- Carrier utilize a combination of tong dies and handling tool dies that need to be changed out to grip different sizes without needing to open the FMS
- Carriers are easily interchangeable, utilizing a spring latch to hold the carriers secure
- Due to geometry, the tension rating for carriers decreases for the smaller pipe sizes
Wear Guides
- Need to be changed for individual sizes of casing or drill pipe in order to help ensure a good bite
- Sized to allow common centralizer sizes through without need to remove them
FMS Sensor Package
- Includes two linear sensors inside of cylinders
- Includes two pressure transducers included inside of control console (sold separately)
- Both sensors work with McCoy’s Edge Server
- Linear Sensors determine if the casing or drill pipe is appropriately gripped before releasing the slips
- Pressure transducer determines if adequate pressure is being supplied
