80-0421-14 KT5500 Drawing
- Version
- Download 2659
- File Size 651.96 KB
- File Count 1
- Create Date February 7, 2018
- Last Updated February 14, 2018
80-0421-14 KT5500 Drawing
| General Size | 5 1/2" |
| Max Torque | 18700 ft.lb. |
| Tong Type | KT5500 |
| Top Level P/N | 80-0421-14 |
| General Configuration Description | Tong + Clincher 6.250" BU (Compression), Closed Center |
| Weight | 2200 lbs |
| Tong Jaws | 2-3/8 To 5-1/2 |
| Jaw/Die Series | 1064-JDK-(See Jaw Tab) 1064-WJK-(See Jaw Tab) |
| Backup Jaws | 2-3/8 To 6-1/4 |
| Jaw/Die Series | BUC7625xxxx |
| Torque / Turns | |
| Hydraulic Load Cell Assembly (Load cell + Hose + Gage) |
10-0029C |
| System Arm Length (in) (T) = Tong (B) = Backup |
32" (B) |
| WINCATT | |
| Turns Ratio (see note 1) |
1:8.3 (A) |
| Encoder Mount | |
| Encoder (Pulses per revolution of encoder shaft) |
60-0072 (200) |
| Proximity Switch | |
| CPT (Counts/Turn) of Rotary Gear Based on > 1000 PPT |
1660 |
| LC/SH Combo. | MHA-030 |
| Spring Hanger | SH-030 |
| Lift Cylinder | LCR-045 |
| Valve Layout (Order of valve function from left to right as viewed by operator) |
Motor-Lift-BU |
| Notes: |
| 1 - Ratio of One full rotation of Rotary Gear to number of rotations of encoder shaft |
| 1:XX (A) = Rotary Idler, encoder mount, 6 tooth rubber gear |
| 1:XX (B) = Pinion |
| 1:XX (C) = SL4500 - Reduction Gear, encoder mount, 12 tooth steel gear" |