McCoy Global demonstrates a commitment to customer satisfaction by delivering products and services that meet or exceed customer requirements and the requirements of recognized standards while continually improving the effectiveness of our quality management system.
Our employees follow the principle: “QUALITY IS MY RESPONSIBILITY” and shall not allow quality of our processes, products and services to be compromised.
Jim Rakievich
President and CEO
McCoy Global
April 9, 2024
-
QMS Certifications
-
McCoy Global USA Inc.
ATEX Certification - Cedar Park, TX
McCoy Global USA Inc.
QUALITY ASSURANCE NOTIFICATION
This certificate may only be reproduced in its entirety and without any change, schedule included and is subject to Intertek Testing and Certification’s Conditions for Granting Certification. RFT-EU-NB-OP-23m2 June 29, 2016* 1. QUALITY ASSURANCE NOTIFICATION 2. Equipment or Protective System Intended for use in Potentially Explosive Atmospheres Directive 2014/34/EU 3. Manufacturers Notification Number: ITS12ATEXQ7641 Issue 03 4. Explosion Protection concept(s) covered by this Notification: See Schedule 1 5. Manufacturer: McCoy Global USA Inc 6. Address: 1300 Arrow Point Drive Cedar Park, TX 78613 U.S.A 7. Intertek Testing and Certification Limited, Notified Body No. 0359 for Annexes IV and VII in accordance with Article 17 of Directive 2014/34/EU of the European Parliament and of the Council, dated 26 February 2014, confirms that the manufacturer has a quality system which complies with Annex IV of the Directive. 8. Full details of the Audit are held on file G103564616 9. This Notification may be withdrawn if the manufacturer no longer satisfies the requirements of Annex IV. Periodic inspection form part of this Notification. 10. This Notification is valid until 23 SEPTEMBER 2021 and can be withdrawn if the manufacturer does not satisfy the quality assurance re-assessment. 11. The CE marking shall be followed by the identification number 0359 identifying the Notified Body involved in the production control stage required by Article 16 of the Directive 2014/34/EU. 12. This Notification may only be reproduced in its entirety and without any change, Schedule included. Intertek Testing & Certification Limited Todd L Relyea Intertek House, Cleeve Road, Leatherhead, Surrey, KT22 7SB Certification Officer Tel: +44 (0)1372 370900 Fax: +44 (0)1372 370977 15 October 2018 www.intertek.com Registered No 3272281 Registered Office: Academy Place, 1-9 Brook Street, Brentwood, Essex, CM14 5NQ. Manufacturers Notification Number: ITS12ATEXQ7641 Issue 03 Page 2 of 2 This Certificate is the property of Intertek Testing and Certification Ltd and is subject to Intertek Testing and Certification’s Conditions for Granting Certification RFT-EU-NB-OP-23m2 June 29, 2016 Schedule 1 Explosion Protection Concepts for which the Manufacturer has been assessed: Intrinsic Safety ‘Ex i’ Flameproof ‘Ex d’ Increased Safety ‘Ex e’ Equipment Types for which the Manufacturer has been assessed Force Bearing Sensors and Peripheral Monitoring Equipment History of this revision: Issue 03: Reassessment audit carried out on 30 August 2018. The QAN is re-issued for a length of three years (due: 2021-09-23) with a surveillance* audit to be carried out no later than 2020-03-22. *Note: If the QMS has been updated to the second edition of ISO/IEC 80079-34 before 2020-03-22, the next audit will be reassessment. NOTE: THIS IS NOT THE CERTIFICATE...See attached.ISO 9001:2015 - Cedar Park, TX
McCoy Global USA Inc.
ABS Quality Evaluations Certificate Of Conformance
This is to certify that the Quality Management System of: McCoy Global USA Inc 1300 Arrow Point Drive Cedar Park, TX 78613 U.S.A.
has been assessed by ABS Quality Evaluations, Inc. and found to be in conformance with the requirements set forth by:
ISO 9001:2015
The Quality Management System is applicable to: THE DESIGN, MANUFACTURE AND MAINTENANCE OF SENSORS AND SYSTEMS FOR HAZARDOUS AND SAFE ENVIRONMENTS.
(Certificate Linked)
IECEx Certification - Cedar Park, TX
McCoy Global USA Inc.
IECEx Quality Assessment Report
INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres QAR Reference No. US/ETL/QAR17.0007/05 QAR Free Ref. No. 105288629CRT-002 Detail of change Remote Surveillance audit conducted 17-18 April 2023. Site(s) audited McCoy Global USA Inc., 1300 Arrow Point Drive, Cedar Park, TX 78613, USA Issuing ExCB ETL - Intertek Manufacturer McCoy Global USA Inc., 1300 Arrow Point Drive, Cedar Park, TX 78613 Location of Manufacturer United States of America Product information Force Bearing Sensors and Peripheral Monitoring Equipment Protection concept Intrinsically safe ‘Ex ia Ga' Flameproof ‘Ex db Gb’ Increase safety ‘Ex eb Gb’ Related QARs US/ETL/QAR17.0007/00 US/ETL/QAR17.0007/01 US/ETL/QAR17.0007/02 US/ETL/QAR17.0007/03 US/ETL/QAR17.0007/04 Related Certificates (manual insertion) N/A Related Certificates (automatic linking) N/A Related Certificates for previous versions IECEx EXV 18.0015X issue: 0 CommentsStatus: Current Date of Issue: 2023-6-16 Valid until: 2024-10-11 Audit date: 2023-6-16 -
McCoy Global S.À.R.L
-