80-140-100-15D-001-30-00 CLE14000DP Drawing
- Version
- Download 2759
- File Size 721.13 KB
- File Count 1
- Create Date February 7, 2018
- Last Updated February 14, 2018
80-140-100-15D-001-30-00 CLE14000DP Drawing
| General Size | 14" |
| Max Torque | 100000 ft.lb. |
| Tong Type | CLE14000DP |
| Top Level P/N | 80-140-100-15D-001-30-00 |
| General Configuration Description | Tong + 15 Lockjaw BU (Compression) |
| Weight | 6800 lbs |
| Tong Jaws | 7 To 14 |
| Jaw/Die Series | 14100-JDK-XXXXX CJ-14X CJ-LF-14X |
| Backup Jaws | 7 To 15 |
| Jaw/Die Series | BUDT15-XXXXX BUA15-8625A BUDT86-XXXXA BUC8625XXXX BB8625XXXX |
| Torque / Turns | |
| Hydraulic Load Cell Assembly (Load cell + Hose + Gage) |
SM100-38813-C |
| System Arm Length (in) (T) = Tong (B) = Backup |
38.8" (B) |
| WINCATT | |
| Turns Ratio (see note 1) |
0.0011527777778 |
| Encoder Mount | 55142 |
| Encoder (Pulses per revolution of encoder shaft) |
60-0068 (100) |
| Proximity Switch | |
| CPT (Counts/Turn) of Rotary Gear Based on > 1000 PPT |
3960 |
| LC/SH Combo. | MHA-130 |
| Spring Hanger | SH-130 |
| Lift Cylinder | LCR-190 |
| Valve Layout (Order of valve function from left to right as viewed by operator) |
Motor-BU-Lift |
| Notes: |
| 1 - Ratio of One full rotation of Rotary Gear to number of rotations of encoder shaft |
| 1:XX (A) = Rotary Idler, encoder mount, 6 tooth rubber gear |
| 1:XX (B) = Pinion |
| 1:XX (C) = SL4500 - Reduction Gear, encoder mount, 12 tooth steel gear" |