8-5/8”
Models

The CLE8625DP casing tong and Lockjaw™ backup allows the operator to go from stabbing to finishing make-up in a single operation for faster make-ups. The Tong and Backup System is an open-throat design that can handle tubulars as large as 8-5/8" in diameter. The system features two jaws in the tong and three jaws in the backup, which encircle the pipe. Wraparound jaws and dies, combined with our low-friction jaw technology, constant radial load cam system, and compensating jaw design, provide exceptional gripping capabilities with reduced pipe deformation, stress, and marking. Using our non-marking aluminum die system or GRITFACE® Dies in the tong and backup will allow stainless steel corrosion-resistant alloy (CRA) to be run as quickly and easily as traditional tongs run conventional steel tubulars.

KT8625
(Tong only)

HD8625 8625 with Backup

HD8625 8625 Tong Only

KT8625 Tong with
CLINCHER® 8625 Backup

CLE8625DP Tong with
Lockjaw™ 8625 Backup

Compare
All 8-5/8” Models

  • Minimum Tong Size OD
  • Maximum Tong Size OD
  • Backup Minimum Tong Size OD
  • Backup Maximum Tong Size OD
  • Maximum Torque
KT8625
Part Option
(Tong only)
Part Number
80-0609-15
  • 2.375 in. (51 mm)
  • 8.625 in. (203 mm)
  • N/A
  • 25,000 lbf·ft (33,895 N·m)
  • N/A
HD8625
Part Option
(Tong with Backup)
Part Number
80-0615-22, 80-0605-5
  • 2.375 in. (51 mm)
  • 8.625 in. (203 mm)
  • 2.375 in. (51 mm)
  • 8.625 in. (203 mm)
  • 35,000 lbf·ft (47,454 N·m)
HD8625
Part Option
(Tong Only)
Part Number
80-0615-6
  • 2.375 in. (51 mm)
  • 8.625 in. (203 mm)
  • N/A
  • N/A
  • 35,000 lbf·ft (47,454 N·m)
KT8625
Part Option
(Tong with CLINCHER® 8625 Backup)
Part Number
80-0615-14
  • 2.375 in. (51 mm)
  • 8.625 in. (203 mm)
  • 2.375 in. (51 mm)
  • 8.625 in. (203 mm)
  • 25,000 lbf·ft (33,895 N·m)
CLE8625DP
Part Option
(Tong with Lockjaw™ 8625 Backup)
Part Number
80-860-850-86D-000-30-00
  • 3.125 in. (76 mm)
  • 8.625 in. (203 mm)
  • 2.875 in. (51 mm)
  • 8.625 in. (203 mm)
  • 85,000 lbf·ft (115,245 N·m)

Information Requests